Winter 2024 A2000® D33 11.75” Pitcher’s Baseball Glove
The 11.75” pitcher’s baseball glove with Gap Welting between index and middle fingers to stabilize its deep pocket.
The Winter 2024 A2000® D33, an 11.75” baseball glove optimized for athletic pitchers to field their position, features a Closed Pro Laced Web that conceals pitch grips while offering flexibility to secure batted balls from the mound. Gap Welting – a piece of the Brick Red Pro Stock® leather palm folded between the index and middle fingers – stabilizes the glove’s deep pocket to help pitchers keep their composure whether they’re dealing on the travel ball circuit or reach Friday Night Starter status in college.
- Web: D1
- Pro Stock® Leather: Pro Stock® Leather is preferred for its rugged durability and unmatched feel
- Comfort Pro™ Fit: Featuring our ProLux™ Leather, the liner of the redesigned A2000 has a richer, softer feel against your hand. The all-new Comfort Sleeve is the finishing touch, concealing the binding in the wrist for more comfort than ever before.
- Rolled Dual Welting: Dual Welting in Wilson gloves goes beyond a mere cosmetic effect, as it’s integrated into the liner of each infield, outfield and pitcher's model, offering better support and helping your glove hold its shape better over time.
- Flat Finger Binding: Flat Finger Binding gives players who prefer to play with a finger outside the glove greater comfort and control in the field. By reducing the amount of space between your finger and the back of the glove, you’ll experience less pain when making plays
- DriLex Wrist Lining: Keeps your hand dry and comfortable on the field and behind the dish
- Bold Logos: Bold logos strip away the distractions, allowing outlined, eye-catching Wilson logos to announce a new era in the iconic story of Wilson Ball Gloves.
- Gap Welting: A section of palm leather folded between fingers to stabilize the pocket.
- Brick / Tropical Blue-X
- 2024 WINTER A2000 D33 Brick/TROPIC 11.75
How to Break in Your Glove
The best way to break in a glove is to use specially designed glove oil. Glove oil keeps the leather ''alive'' while providing a softening condition and minimizing weight gain. Apply a small amount of glove oil to a sponge or cloth, then use the sponge or cloth to apply the oil to the areas of the glove that are currently firm. Start with the palm, the break point of the glove and then web. Then use the glove oil on all other parts of the glove including the entire inside to help moisturize and protect the glove. Work the glove oil into the leather evenly. Do not apply the glove oil directly to the glove, as it will be too concentrated at the point of application.
Also, make sure that the laces get oiled so they can stay moisturized so they will not dry and begin to crack. Otherwise, the webbing of the glove will come loose. Remember that leather is skin and leather experts tell us not to treat glove leather any differently than you would your skin. Therefore prolonged harsh temperatures (oven, microwave) excessive water soaking, especially use of hot water, abrasives, the salt and acids produced from perspiration and excessive dryness all or individually can be harmful to the glove leather.
Break In Quick Tips
- Play Catch!
- Use a Glove Mallet to simulate repeated ball impacts
- If you have access to a pitching machine stand and catch the balls and drop them in a bucket, breaks in the glove and works on hand eye coordination
- Keep your hand in the glove to break it it! If you let someone else break it in, it will fit their hand not yours!
- While watching TV or sitting keep throwing a ball into your glove.
- Constantly move the leather to help it loosen up.
- Don't add a lot of Oil or Conditioner! The more you add the heavier the glove becomes!
- DO NOT BAKE OR STEAM A GLOVE!!! It is a quick fix but will destroy the leather and drastically shorten the life of your glove!
General Glove Care
A properly cared for quality glove will perform for many seasons. Improper handling, cleaning, adjusting and, in particular, over oiling can shorten the life expectancy of your glove. The most important part of caring for your glove is to recognize that leather will deteriorate if subjected to repeated exposure to moisture and heat. MOISTURE (Water / Steam) and HEAT (Oven / Baking) are the worst things for a leather glove.
- Use the glove oil sparingly, as you can always add more.
- NEVER put your glove in an oven or microwave, the heat can damage the fibers of the leather.
- Water / Steam will cause the leather to dry out, crack, and the laces to become brittle. Some stores will steam for you, in a pinch it works for a weekend but not the long term as it drastically reduces the life of the glove.
- Applying glove oil to any non-black colored leather will likely darken it considerably.
- Excessive glove conditioner/oil will damage and shorten the life of a new glove.
- Allow the glove oil to absorb into the leather for 24 hours in a warm area, temperature between 70-90 degrees.
- At the end of the season, apply glove oil very lightly to keep your glove from becoming brittle.
- Store your glove in a dry place with a ball in the pocket to maintain shape.
- Do not use neat's-foot oil, linseed oil or silicon-type spray, these tend to close the pores of the leather, causing it to dry, harden and become heavy.
- Do not apply the glove oil directly to the glove, as it will be too concentrated at the point of application, apply to a cloth first.
- Pummeling a new glove speeds up the break-in, but the glove will be better served if this extra abuse is avoided.
- Wearing a batting glove under your glove absorbs moisture and prolongs the life of the liner of the glove.
Leaving your glove out in the weather will ruin it, as will putting it away wet from perspiration. If it is comfortable, wear a batting glove under your baseball glove (unless you are a baseball pitcher); this absorbs the sweat from your hand. This could add years to the lining of your glove.
When your glove gets wet, dry it with a towel or soft cloth, and leave it exposed to room air for a few hours until the lining is dry. After it dries, use a little glove oil to moisten the leather. When you put your glove away, it's best to put a ball or two in the pocket to help keep its shape.
Routine maintenance should probably be done at least once a season so that you can check the condition of the glove. A tune-up involves tightening the laces in the fingers and web; re-tying any loose knots and cleaning, conditioning and shaping the glove. If you find torn seams, split leather, or broken laces, be sure to have them repaired as quickly as possible. Playing with a damaged glove can damage the glove further and even cause errors. The off-season is also a good time to have the glove professionally re-laced if it requires this work. A number of companies offer this work in addition to complete rebuilding and repair services. At the end of the season, you can take a moderate amount of petroleum jelly, and cover the outside and inside of the glove. Don't ignore the laces or hard-to-get-to areas, both inside and outside the glove. Then take a clean rag and wipe off excess to remove grit and grime. This will also remove and help neutralize much of the salt and acid buildup inside the glove caused by perspiration, a chief problem to the leather lining, usually made of softer leather.
What Size Baseball Glove Should I Use?
There are a few factors that determine what glove you should use, including your position, age, sport and preference. These are typical sizes and a great starting point but ultimately, the size of your glove comes down to what is most comfortable for you.
|
|
INFIELD GLOVE SIZING |
11.25" - 11.75"
Most Popular Size: 11.5"
Infielders gloves are smaller with a shallow pocket to help with quick transitions. It's all about getting the ball out fast!
 |
PITCHER GLOVE SIZING |
11.75" - 12"
Most Popular Size: 11.75"
Pitchers typically have about the same size as other infielders but opt for closed pockets or Modified Traps to avoid seeing their grip. You MUST avoid predominantly white or grey gloves as a pitcher as they are illegal.
 |
OUTFIELD GLOVE SIZING |
12.25" - 13"
Most Popular Size: 12.75"
Outfielder gloves offer a larger pattern size in comparison to infielder gloves. This is due to outfielders needing a larger pocket to assist with pop flies and wanting a longer reach.
 |
FIRST BASE MITT SIZING |
12" - 13"
Most Popular Size: 12.5"
To be able to play first base, you need to be able to catch extremely well. Having the right sized mitt helps. First Base Mitts are larger and have a scoop to help catch anything thrown your way. Youth First Base Mitts for 12 & under are typically 12" or 12.25".
 |
Catcher Mitt SIZING |
31" - 34"
Most Popular Sizes: 32.5"- 33"
These gloves range in size from 31 inches to 34 inches. This isn't because they are three times the size of a normal glove, but rather because these mitts are measured by their circumference rather than top to bottom. Youth are typically 31"- 32.5" and Adult are 33" and up. Due to how thick the padding can be, the pocket on a 32.5" and 34" can be about the same size.
 |
YOUTH GLOVE SIZING
|
9" - 12.5"
Most Popular Sizes: 11" - 11.5"
Infield Youth Gloves: 9" - 11.5"
Outfield Youth Gloves: 10.5" - 12.5"
Youth gloves are recommended for younger players who have not stopped growing and are likely to outgrow their glove sooner rather than later. The age range of youth players is 12 years old and under. Because of the wide range in age, the sizes are going to have a larger range too. The difference with youth gloves is a smaller wrist opening and tighter finger stalls for a more secure fit on a youth player's hand.
How is a glove measured? Fielders gloves and first base mitts are measured by starting at the top of the index finger of the glove down the finger along the inside of the pocket and then out to the heal of the glove. Lay the tape measure across the palm of the glove, so that it folds across and into the indenture, down to the heel of the glove. A catcher's mitt is measured by the circumference.
Thank you for your interest in shopping with us. Here are a few of our shipping guidelines:
-
Shipping is Calculated at Checkout based on Delivery Location
-
Orders placed after 2:00 pm EST will be processed the following business day.
-
All Dates and/or Days shown at checkout are estimates and are not guaranteed delivery dates.
-
UPS Shipping Days are based on Business Days (Saturday & Sunday are not included). That means Next Day Orders Placed before our Friday 2pm cutoff will NOT be delivered until Monday.
-
We ship Monday thru Friday.
-
Pick Up In Store: You can always select Pick Up In Store if you don't want your order shipped. We will pull your order and have it waiting for you upon your next visit!
-
We ship to the contiguous 48 States. Unfortunately we do not ship internationally or to P.O. Boxes.
-
UPS currently ONLY Guarantees NEXT DAY Shipping. They do not guarantee 2nd Day or Ground Shipments based on shipping estimates.
- You will receive tracking information via email as soon as we have your order boxed up and ready to ship!
Gloves CANNOT be Used, Conditioned, Baked and/or Steamed to be Eligible for Return. Our Return policy lasts for 30 days. If 30 days have gone by since your purchase, unfortunately we can’t offer you a refund or exchange. To be eligible for a return, your item must be in its Original Packaging, Unused and in the same condition that you received it. READ MORE
Glove Care & Break In
View all
Winter 2024 A2000® D33 11.75” Pitcher’s Baseball Glove
Pro Stock® Select Leather
Comfort Pro Fit
